Material Separation

Material Separation

Material separation is an important first step in the recycling process. Recovering products from the waste stream and making sure that they end up in the right category to be recycled is difficult but essential to efficient recycling practices. Recycling plants are always trying to raise their recovery rate to keep as much material as possible out of landfills and lower energy consumption by making new products out of these used materials. The right separation equipment properly tuned for a specific application will always play a serious role in creating a greater rate of recovery. Workers can separate some materials manually, but separation is always more effective with the aid of a machine, particularly when dealing with high volumes of material.

Materials Separation
Harmony Enterprises, Inc.

As technology improves and more and more recovery centers do everything they can to raise their recovery rate, more materials are able to be eliminated from the waste stream and repurposed for new uses. The result is a reduced impact on landfills and a healthier approach to environmental care. Material separation equipment plays a key role in helping to maximize the efficiency and effectiveness of this process. Technology has led to many innovative separation tools and techniques, but here are the main tools:

Magnetic Separators

Magnetic separators assist in separating ferrous materials from non-ferrous materials. This is accomplished by exposing the unsorted material to a powerful magnet that is mounted over a conveyor belt or in a chamber. The magnetic force pulls out the ferrous metals, and leaves the rest. Magnetic separating equipment is very convenient in metal recycling facilities because it keeps material moving in scrap yards and other high volume facilities.

P-Rex Scrap Drum Magnet

Air Separators

An air separation unit can be used to remove light debris and low value materials from a stream of potentially recyclable waste. In most cases, high pressure air is blown over the drop off point of a conveyor, allowing the heavier material to fall away to the next conveyor while the light material is blown into a bin or some other depository. Other air separators may use vacuum or cyclone technology to suck lightweight, non-metallic materials from the waste stream instead.

Air Knife Separators

Eddy Current Separators

An eddy current separator is an advanced piece of material separating equipment that has the ability to separate non-ferrous metals like aluminum and copper out of a waste stream. An eddy current separator uses a powerful magnetic field to separate non-ferrous metals. However, unlike a magnetic separator which pulls out ferrous materials by attracting them, an eddy current separator actually causes an opposing magnetic field to form within the non-ferrous metals and thus repels these materials. For this reason, the separator is typically placed at the end of a conveyor where the non-ferrous materials are thrown forward into their own bin while other materials simply fall off the conveyor into a separate bin. It is important to note that all ferrous metals should be removed from the waste stream before the eddy current separator is used, as these materials can cause problems with the separator.

Screeners

The meticulous task of sorting mixed recyclables can also be accomplished by screeners. Screeners are another type of material separation equipment, which, as their name suggests, separate materials through the use of different types of screens. Screeners utilize a more mechanical approach to separation than the separators listed above, but they also come in a huge variety of styles and sizes to meet the requirements of different applications and to specialize them for particular materials. Below are several types of screeners used for recycling applications:

Vibrating Screen Conveyor

Vibratory Screeners

One very common screening machine is a vibratory screener. Recyclable materials are fed into the vibratory screener and across a screen. The machine constantly generates vibrations in the screen which causes the recyclables to jostle around. This movement dislodges smaller components from the general bulk of recyclables, and these smaller components can then fall through the screen into their own bin or continue on in the recycling process. These screeners are very valuable for separating materials by size, and since larger materials generally require more processing, this type of separation can save time and energy by pulling out smaller pieces that do not need the extra processing. Read more…

Rod Decks

Rod deck recycling screens are a specially designed version of a vibratory screener. Instead of a normal grid screen, the rod deck consists of several rows of rods. Much like a vibratory screen, as material is fed into the rod deck, the machine generates vibrations which cause the material to jostle and bounce, loosening smaller bits from the bulky materials. Though their operation is essentially the same, rod decks are better equipped to separate wet, abrasive, heavy, and difficult to handle materials. The flexibility and reduced surface area of the rods keeps materials from sticking and blinding, making this kind of separation equipment a huge asset in many recycling applications.

Disc Screeners

A disc screener is made by creating a series of discs that rotate around a rod and then lining the rods up side by side so that materials can be pulled over them and smaller materials fall through the space between the discs. The rotation turns objects over during motion, so that after a few feet any smaller bits of material have fallen through the discs. In a recycling plant, a disc screener can improve recovery rates when the disc sizes are designed with particular materials in mind.

Star Screeners

A star screener is similar to a disc screener, except star shaped implements are used instead of discs to screen material. These horizontally mounted star shaped pieces pull in fractured material and help to recover damp and cohesive material by separating it. The speed of the screen’s rotation can be adjusted based on the type of material being processed in the recycling facility.

Recycling Equipment Power Pages

Baler Machines

Baler Machines

A baler is a piece of equipment used to compress solid industrial waste or recyclable materials (e.g., paper, plastic, foam, cans, etc.) to achieve better material handling and storage. Eliminating empty space between individual items of these bulk products is a great way to save costs attributed to storage and transport...

Cardboard Balers

Cardboard Baler

A cardboard baler is a mechanism that uses a metal plate driven by a hydraulic ram to apply tremendous pressure and force to crush, compact, and compress pieces of cardboard into tightly formed and easy-to-transport cubes and...

Types of Balers

Vertical Balers

Modern balers are descendants of hay presses, invented in the mid-nineteenth century, that made it easier to gather and stack hay. The earliest hay presses were stationary units built into a barn and extending two to three stories...

Industrial Shredders

Industrial Shredders

An industrial shredder is a piece of heavy duty equipment designed to shred dense and light materials to prepare them for recycling or for the destruction of unusable products. They are an environmentally sound device that...

Metal Shredders

Metal Shredder

Scrap metal must be processed to be effectively recycled and ready for reuse. Metal shredders are machines used to process a variety of metal scraps. Metal shredders are frequently used to reduce metal debris to a standard...

Shredding Machines

Shredding Machines

A shredding machine is equipment utilized for shredding. Shredding machines are used to reduce the size of materials. While most online sources define the shredding machine as...

Trash Compactors

Trash Compactors

A Trash compactor is a machine or device designed to compress, reduce, and compact a variety of materials through hydraulic, mechanical, or pneumatic force. The initial steps in the compacting process are the collection of the material to be compacted...

Vibratory Conveyors

Vibratory Conveyor

Vibratory conveyors are material-handling equipment used to transport fine to coarse-grained bulk materials. These vibratory conveyors are strong conveying equipment utilized for bulk commodities with fine to coarse graininess...

Vibratory Feeders

Vibratory Feeders

Vibratory feeders are short conveyors used to transport bulk materials utilizing a controlled vibratory force system and gravity. The vibrations impart a combination of horizontal and vertical acceleration through tossing, hopping, or sliding-type of action to the materials being handled...

Recycling Equipment
Featured Industries